当前位置: 首页/Industry News
Basic introduction of laboratory micro autoclave
文章来源:霍桐仪器   发布日期:2021-09-05   浏览次数: 333

The autoclave body is mainly made of 1cr18ni10ti stainless steel, and titanium (TA2), nickel (Ni6) and composite steel plate can be made according to the requirements of different media,
The kettle body structure includes flat cover, convex cover and closed reactor body with manhole. The opening on the kettle cover can be designed according to user requirements;
Heating methods include jacket steam, jacket hot oil electric heating and other forms for users to choose from when ordering. For the kettle body with polishing requirements
The surface can reach the above mirror polishing level, and the materials with high viscosity can be processed into a conical bottom, which is convenient for discharging and cleaning.
The magnetic drive device of intelligent high-pressure reactor is the core technology for realizing material mixing in high-pressure reactor. It is a necessary component with a design pressure of more than 50bar.
After the patent is disclosed, it becomes the industry standard of pressure mixing equipment.
After the patent was published, it became the industry standard of pressure mixing equipment. The magnetic transmission device seals the components really used for mixing in the pressure environment, so as to completely solve the reliability of the dynamic seal between the mixing shaft and the reactor.
Because the basic manufacturing materials of the magnetic transmission device are ferromagnetic materials (iron-based alloy and nickel based alloy), the magnetic permeability is good, and the magnetic field has almost no loss when passing through the sealing alloy layer.
Thus, the rotating magnetic field generated by the external driving permanent magnet can be effectively accepted by the internal permanent magnet rotor, and then drive the stirring parts in the reactor for material mixing
I hope it will help you.